Fitting Position: Left ; Axle Load [t]: 6,5 t ; Axle Load [t]: 6,7 t ; Axle Load [t]: 7,5 t ; Axle Load [t]: 8 t ; Spring Type: for pneumatic suspension vehicles ; Parameter: DITAS ; Fitting Position: Front Axle ; Fitting Position: Left and right ; Diameter [mm]: 40 mm ; Length [mm]: 168 mm ; Weight [kg]: 0.34 kg ; Cone Size [mm]: 28.6 mm ; Inner thread [mm]: M52x1,5 mm ; Outer thread [mm]: M20x1,5 mm ; Thread Type: with right-hand thread ; ArticleState: Normal
Fitting Position: Right ; Axle Load [t]: 6,5 t ; Axle Load [t]: 6,7 t ; Axle Load [t]: 7,5 t ; Axle Load [t]: 8 t ; Spring Type: for pneumatic suspension vehicles ; Parameter: DITAS ; Fitting Position: Front Axle ; Fitting Position: Left and right ; Diameter [mm]: 40 mm ; Length [mm]: 168 mm ; Weight [kg]: 3.5 kg ; Cone Size [mm]: 28.6 mm ; Inner thread [mm]: M52x1,5 mm ; Outer thread [mm]: M20x1,5 mm ; Thread Type: with left-hand thread ; ArticleState: Normal
Fitting Position: Rear Axle Left ; Colour: Cast Iron Grey ; Inner thread [mm]: M8 mm ; Weight [kg]: 0.95 kg ; ArticleState: Normal ; General Information: für Lenkspindel
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Length [mm]: 95 mm ; Outer thread [mm]: M16 x 1,5 mm ; Outer thread [mm]: M24 x 1,5 RHT mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 20 mm ; Fitting Position: Front Axle Right ; Pipe Ø [mm]: 27 mm ; Weight [kg]: 0.672 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; Technical Information: Bitte Abmessungen beachten!
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Engine Code: TD122FL; TD122FS ; Fitting Position: Front Axle Left ; Length [mm]: 86 mm ; Inner thread [mm]: M22 x 1,5 mm ; Outer thread [mm]: M24 x 1,5 mm ; Cone Size [mm]: 31.5 mm ; Fitting Position: Front Axle ; Weight [kg]: 1.6 kg ; ArticleState: Normal ; General Information: für Lenkhydraulikzylinder, mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Paired article numbers: 01910 ; Length [mm]: 168 mm ; Inner thread [mm]: M52 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 28.6 mm ; Diameter [mm]: 40 mm ; Fitting Position: Front Axle left and right ; Weight [kg]: 3.5 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Front Axle Right ; Length [mm]: 95 mm ; Width [mm]: 68 mm ; Thickness [mm]: 100 mm ; Inner diameter [mm]: 36 mm ; Inner thread [mm]: M26 x 1,5 mm ; Outer thread [mm]: M24 x 1,5 mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 30 mm ; Fitting Position: Rear Axle left and right ; Weight [kg]: 1.955 kg ; ArticleState: Normal ; General Information: für Lenkhydraulikzylinder, mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Paired article numbers: 01909 ; Length [mm]: 168 mm ; Inner thread [mm]: M52 x 1,5 mm ; Outer thread [mm]: M20 x 1,5 mm ; Thread Type: with left-hand thread ; Cone Size [mm]: 28.6 mm ; Diameter [mm]: 40 mm ; Fitting Position: Front Axle left and right ; Weight [kg]: 3.4 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.
Fitting Position: Left ; Fitting Position: Front ; Rod/Strut: for coupling rod ; Thread Type: with left-hand thread ; Outer thread 1 [mm]: M20x1.5 mm ; ArticleState: Normal
Fitting Position: Right ; Fitting Position: Front ; Cone Pitch: 1/6 ; Length [mm]: 125 mm ; Outer thread [mm]: 30x1,5 mm ; Cone Size [mm]: 28.6 mm ; Rod/Strut: for coupling rod ; Thread Type: with right-hand thread ; Outer thread 1 [mm]: M20x1.5 mm ; ArticleState: Normal
Fitting Position: Right ; Fitting Position: Front ; Thread Type: with right-hand thread ; Outer thread 1 [mm]: M24x1.5 mm ; ArticleState: No longer supplied by manufacturer
Outer thread [mm]: M30 mm ; Thread Pitch [mm]: 1.5 mm ; Length [mm]: 125 mm ; Thread Type: with right-hand thread ; Weight [kg]: 1.8 kg ; ArticleState: Normal
Outer thread [mm]: M30 mm ; Thread Pitch [mm]: 1.5 mm ; Length [mm]: 125 mm ; Thread Type: with left-hand thread ; Weight [kg]: 1.67 kg ; ArticleState: Normal
Fitting Position: Rear Axle Right ; Colour: Cast Iron Grey ; Inner thread [mm]: M 30 x 1.5 mm ; Height [mm]: 125 mm ; Weight [kg]: 1.98 kg ; ArticleState: Normal
Fitting Position: Front Axle ; Fitting Position: in front of axle ; Fitting Position: Left ; Inner thread [mm]: M8 mm ; Weight [kg]: 0.95 kg ; ArticleState: Normal
Length [mm]: 95 mm ; Outer thread [mm]: M24 x 1,5 mm ; Outer thread [mm]: M16 x 1,5 mm ; Outer thread [mm]: M24 x 1,5 RHT mm ; Thread Type: with right-hand thread ; Cone Size [mm]: 20 mm ; Fitting Position: Front Axle Right ; Pipe Ø [mm]: 27 mm ; Weight [kg]: 0.672 kg ; ArticleState: Normal ; General Information: mit Kronenmutter und Splint
; Technical Information: Bitte Abmessungen beachten!
; General Information: Die von uns gelieferten Produkte sind ausschließlich dem
bestimmungsgemäßen Gebrauch zuzuführen. Der Einbau darf
nur durch geschultes Fachpersonal erfolgen. Produkte werden
in der Regel ohne Montageanleitung geliefert.